Loading...
Loading...
Cover Accessories & Ports
Take an HDPE cover penetration to a threaded stainless connection.
Transition ports solve the problem of connecting threaded pipe, instrumentation, or hose to an HDPE cover. The lower body is HDPE, welded to a base plate that bonds to the cover, and the upper end transitions to a stainless steel male or female NPT fitting so you can thread standard hardware straight onto the cover penetration.
The stainless section is available in 304 or 316 for corrosive and biogas service, and the transition is fabricated to order in a range of NPT sizes. This is the clean way to bring a sensor, valve, hose barb, or piping run through a sealed cover without improvised adapters.
Configure & Request Quote
Made to order. No online payment. We reply with pricing and lead time.
Specifications
| Lower body | HDPE, extrusion-welded to base plate |
| Transition | Stainless steel, 304 or 316 |
| Connection | Male or female NPT |
| Sizing | Various NPT sizes, made to order |
Where It's Used
These parts mount on EFI floating covers and gas-tight digester covers, and are fabricated at the EFI shop in Gaston, SC.
FAQ
More Parts
Bolt-on HDPE access port welded to a cover base plate, with a bolted lid or removable rubber cap. Made in any standard pipe size.
View part
Pre-plumbed HDPE base assembly with a manual ball valve and check valve to introduce liquids under the cover, with unions for service.
View part
HDPE riser or elbow terminating in a drilled flange face, fabricated in various sizes and orientations to bolt up to piping and equipment.
View partAdd what you need to your quote list, or call the shop and we will build to spec.
Call us directly: (307) 264-0309
Back to All Parts