Loading...
Loading...

Cover Accessories & Ports
Keep condensate out of the gas line between the cover and your equipment.
Biogas leaves a covered lagoon or digester warm and saturated with water vapor. As it cools in the collection line, that water condenses and settles at low points, where it restricts gas flow and can send liquid toward blowers, flares, and downstream equipment. A moisture trap gives that condensate a controlled low point to collect instead of pooling in the gas line.
Each trap is fabricated from welded HDPE pipe and fittings at the EFI shop in Gaston, South Carolina. Traps are made to order in various sizes, in standard and custom configurations, with the orientation set to match your line layout.
Configure & Request Quote
Made to order. No online payment. We reply with pricing and lead time.
Specifications
| Body | HDPE pipe and fittings, welded construction |
| Configurations | Standard and custom, orientation matched to your line |
| Sizing | Various line sizes, made to order |
| Fabrication | In-house at the EFI shop, Gaston SC |
Where It's Used
These parts mount on EFI floating covers and gas-tight digester covers, and are fabricated at the EFI shop in Gaston, SC.
FAQ
More Parts

Bolt-on HDPE access port welded to a cover base plate, with a bolted lid or removable rubber cap. Made in any standard pipe size.
View part
HDPE port that transitions to a stainless steel male or female NPT connection, welded to a cover base plate. Available in various sizes.
View part
Pre-plumbed HDPE base assembly with a manual ball valve and check valve to introduce liquids under the cover, with unions for service.
View partAdd what you need to your quote list, or call the shop and we will build to spec.
Call us directly: (307) 264-0309
Back to All Parts